Current is a rate, not a speed.
Current measures how much charge crosses a chosen surface each second:
\[ I = \frac{\Delta Q}{\Delta t} \]
For a wire carrying carriers of charge \(e\), number density \(n\), cross-sectional area \(A\), and drift speed \(v_d\):
\[ I = nAev_d \]
- \(n\) — number of charge carriers per cubic metre (for copper, about \(8.5\times10^{28},\mathrm{m^{-3}}\))
- \(A\) — cross-sectional area of the wire in square metres
- \(e\) — elementary charge, \(1.6\times10^{-19},\mathrm{C}\)
- \(v_d\) — drift speed in metres per second
What the formula says: the current is set by how many carriers are available, how wide the channel is, and how fast they drift. Because \(n\) and \(A\) are large, a tiny \(v_d\) still produces a perfectly ordinary current.
What it does not say: nothing here refers to how quickly a change travels along the circuit. The formula describes a steady state, where charge is already crossing the surface at a constant rate.